简介: A Brief Introduction

本单元起重机符合JB/T1306《电动单梁桥式起重机》及JB/T2603《电动单梁悬挂起重机》技术条件。其结构特点是电动葫芦或手动单轨小车沿主梁工字钢下翼缘运行，进行物料搬运作业，通常用于车间、仓库等物料搬运作业，其中手动单梁起重机用于不允许用电或无电源场合。配合马达抓斗或单轨抓斗还可用于散装物料搬运作业。本单元起重机结构紧凑，操作灵活，既可用于地面操作，也可用于司机室操作。特殊要求情况下，还可进行遥控操作。是工业生产或贮运不可缺少的装备。
The technical standards of this kind of crane are in accordance with JB/T1306《Electric single girder crane》and JB/T2603《Electric single girder suspending crane》.It features compact structure,flexible manipulation.with pendant,remote or cab control,it is a indispensable equipment for material handling in workshops,warehouses etc.

LX型0.5吨-10吨电动单梁悬挂桥式起重机
Type LX Electric Single-Girder Suspending Cranes 0.5t-10t

本机适用于工厂、仓库。其建筑物轨面到屋架下弦高度≤500mm的场所，小车采用电动葫芦与之配套，机理结构灵活，运行安全可靠。如有特殊要求的跨度，我厂可代为非标设计制造。
The crane applies to works and storehouses where it is≤500mm height between the rail surface of building and the rafter of roof truss.The trolley forms a set with electric hoist,The mechanism of crane is nimble,with safe and reliable motion.It is capable of designing and making non-standard hoisting equipment,if you need special requirement in span.

LD型1吨-10吨电动单梁桥式起重机
Type LD Electric Single-Girder Overhead Cranes 1t-10t

本机适用于工厂仓库对货物吊装量不大且运转不甚频繁的作业场所，小车采用电动葫芦与之配套，此外本厂承接特殊跨度和特殊要求的非标订货。
1t-10t Type LD Electric Single Girder Overhead Crane.The crane applies to works and storehouses where the lifting capacity for goods is not heavy and the crane isn't operated frequently.The trolley forms a set with the electric hoist.In addition.it is capable of designing and making various kinds of non-standard hoisting equipment according to orders.

注：1.厂房层顶高度应比起重机最高尺寸≥200mm。
2.括号内尺寸(800)仅为闭式端面开门操纵室用。
Note:1.The headroom of the crane should be no less than 200mm.
2.The size 800 in the bracket is only for the use of closed type cabin with door at side.

LXG型电动悬挂桥式过轨起重机
Type LXG suspension over-rail cranes with hoist

LXG型电动单梁悬挂过轨起重机是为我国大型火力发电厂输磨煤系统而设计的专用起重设备,主要用于吊运磨辊及其它磨煤机部件,它还适用于连跨车间以及需要悬挂过轨的各种现场。
Type LXG Suspension Over-Rail Crane is specially designed for use at coal,mill in power plant,it applies to hoisting the roller spare parts of coal mill and etc,It is also suitable for use of connecting the workshop and various site where it is needed.

SDQ型1吨-10吨手动单梁桥式起重机
Type SDQ manual-acting single beam overhead cranes 1t-10t

本机属轻小机种，适用于工厂设备安装，维修以及无电源或虽有电源但经常停电的作业场所，手动单轨小车与之配套，适用性好，造价合理，如有特殊要求者，我厂可代为设计制造。
The crane is a light-duty machinery,It applies to the works where equipments are erected and served and the place where it is no power or power is often cut.It forms a set with manual monorail trolley.The price is reasonable.It is capable of designing and making if you have special requirement.

SLX型0.5吨-3吨手动单梁悬挂起重机
Type SLX manual-acting single-beam suspending cranes 0.5t-3t

在下列情形之一者，采用本机种。1、吊装货物不频繁2、建筑物轨面上至屋架下弦高度≤500mm。３、无动力源4、虽有电源但供电不正常或经常停电。
Use the Crane according to the following situation:1.Unfrequent for lifting goods.2.Height (between the rail surface of building and the rafter of roof truss) ≤500mm3.No power.4.Power is cut frequently or supplied irregularly.