NHSS型钢丝绳手扳葫芦是一种设计新颖、制造精良的轻小型手动起重工具。具有重量轻、结构紧凑、用途广泛、维护方便等特点。该产品较之其它类型手动起重工具更能适应露天，野外恶劣环境。
该机外壳采用铝合金材料，具有足够的强度，整机重量轻，携带十分方便。 机内构件采用优质合金钢制造，工艺先进，全部零件经过严格的质量检查，主要承载零件均以国际标准为规范，进行超负荷试验，确保质量优良。
钢丝绳的工作长度长，作业范围大，这是该机的又一特点。可以将几十米以外的重物牵引过来或在高处升降重物，挂结简便。结构设计中选择了合理的杠杆连动系统，手扳力小，对钢丝绳磨损亦小，提高了整机的可靠性。和其它同类产品相比，本系列产品更加合理，性能优越。
NHSS型钢丝绳手扳葫芦可广泛用于建筑施工、大型管道铺设、机电设备和石油化工大型反应塔、储罐的安装、校准、铁塔及其它钢木结构的竖立、拼装焊接、校准、铁轨、枕木的铺设、移位、交通运输中笨重货物的装卸、电线张紧、坑道支撑木的拆除、林区木材的集放等等，对于局部空间受到限制的狭窄工作场所、高空作业、野外作业、坑道、深井作业和无机电供能场所的各种牵引、提升作业、选用本系列产品尤为适宜。
NHSS型钢丝绳手扳葫芦不仅能作各种方向、角度的牵引，而且如配用一个或几个滑轮组时，还能作非直线的牵引作业，并获得合适的操作位置，或成倍地扩大负载能力。随着您对本系列产品性能的不断了解和掌握，其运用范围将不断扩大。
*请按照"NHSS型钢丝绳手扳葫芦使用维护说明书"使用维护。
Globe Brand Type NHSS Wire rope pulling hoist is a kind
of small-sized,compact,new design,hand-operated lifting tool.It
features light weight,compact structure,wide range of applications
and easy maintenance,This type of hoist is suitable for use
in open air sites under adverse circumstances.
The housing of the hoist is made of aluminum alloy,thus
producing adequate strength,yet light in weight and making
it quite portable,while the component parts inside are made
of high quality alloyed steel with advanced technology,Strict
quality control examinations have been carried out on all
the component parts.As for the major parts subject to high
tension are tested according to ISO standards even with overloading
to ensure top quality.
The wire rope used to carry various kinds of hoisting load
at a lengthy period,such as a heavy load for a long distance
e.g,from tens of meters or to a high position can be easily
hitched.In the structure design,such reasonable lever connecting
system is chosen that the traction force is relatively small,the
wear of the wire rope is small as well,resulting in high reliability
of the machine.As compared with other products of the same
type,this series design has the advantages of being more reasonable
and better performance.
Type NHSS wire rope pulling hoist is widely suitable for
use in bridge-construction,laying of large-size pipes,installation
and adjusting of machinery an electric apparatus,and large
reaction tower of petrochemical industry;the installation
and alignment of storage tanks;erecting,fitting,welding and
alignment of masts,steel concrete timber structures;laying
and translocating of rails and sleepers;loading and unloading
bulky heavy goods during transportation.cable tensioning;demolishing
of gallery supporting logs;stacking forrestry wood;and othersimilar
cases.The hoist of this series is especially suitable for
use in narrow working sites of limited space,where the job
is high above the ground or in open air places,in tunnel of
deep well,where no power for traction or lifting is available.
Type NHSS wire rope pulling hoist can perform traction not
only at various directions and angles,but also for non-linear
movement;in adition,proper operating position can be obtained
or traction effort doubled and redoubled,if fitted with one
or more pulley blocks.The more you understand and master the
characteristic of this series product uninterruptedly,the
wider application range of this hoist you can get.
Please operate and maintain the hoist in accordance with
the:"peration & Maintenance Manual of NHSS Wire Rope Pulling
Hoist". |
| |
使用滑轮组图示
Diagram illustrating the use of Pulley Blocks |
外形尺寸及主要参数
Overall Dimension and Main Technical Data
|
HS-C型
HS-C型手拉葫芦是我厂近年开发制造的另一个系列。它在使用功能方面同HS、HSZ型手拉葫芦完全一致；不同之处是该产品在外观造型上改变了几十年如一的圆型模式，仿倒三角形使之造型美观独特、在产品结构上则采用了优质合金钢及优良的热处理、大压力角，使得整机性能优良、手拉力轻、安全可靠、寿命长，深受用户欢迎。
Model HS-C series of chain block,which is newly developed
by us,has the same properties as Model HS & HSZ. The
disparties are:1.Triangle appearance instead of round,which
makes the block more beautiful and distingtive 2.Adopting
improved inherent gear transmission structure,the main load-bearing
gears are made of high-quality alloy steel with fine heat-treatment,So
the block has excellent performance with low effect on the
hand chain.Model HS-C chain block is reliable and durable
and has been widely received both at home and abroad. |
外形尺寸及主要参数
Overall Dimension and Main Technical Data
| 0.5t
1t 1.6t |
2t
3.2t 5t |
10t |
20t |
|
| HSZ型
HSZ型手拉葫芦适用于小行程(2.5-5m)的室内外起重作业。挂结、操作简易；维护、携带方便。广泛用于工厂、矿山、农业生产，水利工程和建筑工地，为港口、交通运输等小型起重作业的常备机械。
HSZ型手拉葫芦常用来完成设备、货物的吊装以及工厂内设备或产品部件的安装拆卸。由于采用环形链条承载运行，对粉尘、泥水不甚敏感，因此特别适用于露天恶劣环境和无电力供能场所起重作业。
HSZ型手拉葫芦已广泛在厂房内部与配套手拉小车、单轨架空梁、回转悬臂单梁构成内部货物、成品、半成品搬运作业网络，提高了车间、仓库贮运能力，成为操作工的有力助手。
地球牌HSZ型手拉葫芦结构设计紧凑合理，体积小，重量轻，采用对称布置的两级外啮合圆柱齿轮减速机构以及螺旋载重制动器，有足够的承载能力，制动可靠，机械效率高，手拉力小。主要零件均采用优质钢材制造，起重链条选用合金钢材，用引进的先进设备制造。链条的主要技术指标均达到国际标准。关键承载零部件和整机均通过合格检测和出厂测试。整机性能指标稳定，安全可靠，连续运行性好，使用寿命长。
Type HSZ Hand Chain Block is suitable for short stroke
(2.5m-5m)indoor and outdoor liftwork.Easy operation and
simple maintenance.It is widely suitable for use in factories,mines,agriculture
production,water conservancy project and construction site.It
is also a kind of small machanics commonly applied at ports
and in communication transportation.
Type HSZ Hand Chain Block is often used to lift the equipment,commodity
and removing or installing machine.Because of adopting link
load chain,It is not sensitive to the powder,mud.So the
block is suitable for those site lacking of electric source
or with only limited conditions.
Type HSZ Hand China Block has been used widely,together
with hand trolleys or Jib Crane at workshop to form a mass
of finished products and intremediate products.It's also
a best assistant for the operator.
GLOBE BRAND hand chan block is designed in compact structure,and
small volume and light weight. Use symmetrical cylindrical
gear,reduction gear and spiral load brakes to achieve an
unique combination of high mechanical efficiency,lower effect
on hand chain and brake reliability.The main parts are made
of high quality steel.The alloy steel load chain is manufactured
by advanced Germany Chain Making Machine.And the main technical
data of chain reach ISO standard,The key parts and the whole
body are inspected and tested severely. |
外形尺寸及主要参数
Overall Dimension and Main Technical Data
|
HSH型环链手扳
HSH型环链手扳葫芦，是新一代的具有多用途的手动起重机械。它广泛用于工矿、运输、建筑、电力、造船及林业等部门的设备安装，散件捆绑，起重货物，拉紧线路及焊接对位等场合，尤其是在无电源及狭小场所用于牵引更显示其独有的优越性。本产品具有以下特点：
使用安全可靠，维护方便，机械效率高，手扳力小，操作灵活，经久耐用，自重较轻，携带方便。HSH型环链手扳葫芦采用了对称布置的二级外啮合齿轮传动结构和螺旋载重制动器，并设计有齿轮离合装置，主要零部件有：手柄制动器、长短轴齿轮、花键齿轮、片齿轮、链齿轮和链条等，其工作原理如下：（见图）
提升（或牵引）重物：将拨块置"向上"位置扳动手柄（13），此时换向棘爪（11），拨动制动螺母（9），将摩擦片（8），棘轮（7），制动器座（6）旋紧成一体，并带动长轴齿轮（3）及片齿轮（4），短轴齿轮（1），花键齿轮（2）共同旋转，同时通过花键联接于花键齿轮上的链轮（5）便带动链条提升（或牵引）重物。
放落重物：将拨块置于"向下"位置，扳动手柄，此时换向棘爪拨动制动螺母，将制动螺母松开摩擦片，重物下降。重物下降时，又带动长轴转动，从而使制动器座与制动螺母旋紧，重物又停止下降。
HSH Series Chain Lever Hoist is a kind of newly-developed
manual hoist with versatile appliance,which is capable of
being widely applied in factories,mines ,transports,construction-sites,and
electricity,shipbuildings and forestry industries for installing
machines,bulk strapping and fastenning,goods lifting,tightenning
fittings of wires,assembling and welding,etc,it has exceptional
advantages particularly for pulling from various angles
in the very limited narrow sites or places where no electric
power supply.
HSH Series Chain Lever Hoist has the following characteristics
in design and service:Safe,reliable and minimun maintenance.High
efficiency and light handpull.Easy to handle and durable
in use.Fine appearance and excellent performance,Light weight
and portable in size.
HSH Series Chain Lever Hoist is provided with a transmission
mechanism of two-step outer mesh gears and a screw load
brake with a "Free Gearing"system,It comprises the following
principal parts:lever handle-brake,driving shaft,splined
gear pinion shaft,disc gear,sprocket and load chain,etc.Its
main principle of operation is as follows:(See Fig.)
Liffing(or Pulling)Load:Set the selector lever to "UP"
position.Operate lever handle(13),then change-over pawl(11),turns
brake nut(9)to press friction plates(8)and ratchet disc(7)tightly
against the brake set(6)thus causing these parts to rotate
in unison,Then drive the driving shaft(3),disc gear(4),pinion
shaft(1),splined gear(2),hence,the sprocket(5)which is mounted
on the splined gear actuates the load chain to lift(or pull)the
load smoothly.
Lowering Load:Set the selector Lever to"DN" position,Operate
lever handle,then change-over pawl turns brake nut to loose
friction plate,hence,the load goes down,While lowering,and
drive the driving shaft to rotate,thus make brake seat and
brake nut rotating tightly,and the load stopped. |
外形尺寸及主要参数
Overall Dimension and Main Technical D
南京起重机械总厂特起销售中心
|
电话:（025）58833856 58822060 传真：（025）58822060
联系人：易先生 |
| |
技术支持：东方网络信息技术有限公司 |
|
